RT430/434
4
Outputs
Connectors
Table 21: RT430/434 rear panel connectors
Indicator
A
2 power supplies (one is optional), AC/DC high voltage or DC low voltage
B
2 TTL electrical outputs using BNC connectors, one of them insulated
2 TTL electrical outputs using Euro Type connectors, one of them insulated;
2 open collector outputs;
C
Dry-Contact relay (Locked);
And 1 CMOS/TTL level even input.
D
1 modulated-amplitude output for IRIG-B124 signal
E
2 optical outputs using ST connector
F
RS232 and RS422/485 serial port
2 RJ45 communication ports via Ethernet network (RT430)
G
4 RJ45 communication ports via Ethernet network (RT434)
H
GNSS antenna input
70
See figures below to refer to the rear panel connectors of RT430/434.
Figure 42: Rear panel connectors of RT430 (top) and RT434 (bottom)
Chapter 8 – Technical Specification
Description
RT430/434