Chapter 2: Safety Information; Health And Safety; Symbols - GE Reason RT430 Technical Manual

RT430/434
Reason RT430/RT434
GNSS Precision-Time Clock

Chapter 2: Safety Information

1

Health and Safety

2

Symbols

RT430/434
This chapter provides information about the safe handling of the equipment. The
equipment must be properly installed and handled in order to maintain it in a safe
condition and to keep personnel safe at all times. You must be familiar with
information contained in this chapter before unpacking, installing, commissioning, or
servicing the equipment.
Personnel associated with the equipment must be familiar with the contents of this
Safety Information.
When electrical equipment is in operation, dangerous voltages are present in certain
parts of the equipment. Improper use of the equipment and failure to observe
warning notices will endanger personnel.
Only qualified personnel may work on or operate the equipment. Qualified personnel
are individuals who are:

Familiar with the installation, commissioning, and operation of the equipment
and the system to which it is being connected.

Familiar with accepted safety engineering practices and are authorized to
energize and de-energize equipment in the correct manner.

Trained in the care and use of safety apparatus in accordance with safety
engineering practices

Trained in emergency procedures (first aid).
The documentation provides instructions for installing, commissioning and operating
the equipment. It cannot, however cover all conceivable circumstances. In the event
of questions or problems, do not take any action without proper authorization. Please
contact your local sales office and request the necessary information.
Each product is subjected to routine production testing for Dielectric Strength and
Protective Bonding Continuity.
Throughout this manual you will come across the following symbols. You will also see
these symbols on parts of the equipment.
Caution: Refer to equipment documentation. Failure to do so
could result in damage to the equipment
Chapter 2 – Safety Information
18