Euro Type Connections; Ethernet Communication; Figure 21: Event Input; Figure 22: Euro Type Label For Connections - GE Reason RT430 Technical Manual

RT430/434

Euro Type Connections

3

Ethernet Communication

34
The electrical output from the PTP Slave clock should be configured to send pulses in
a time frequency and an event will be registered in a log file containing the pulse
timestamp for each received pulse. The input accuracy is in the magnitude of ns.
The following information is available in the top of the unit, but if the equipment is
already installed in the panel, it may be useful when handling the Euro Type
connector for TTL outputs, Open collector, Locked relay and event input.

Figure 22: Euro Type label for connections


Numbers 1 and 2: Open collector outputs;

Number 3: Locked (dry contact) relay;

Number 4: Isolated TTL output;

Number 5: Event input;

Number 6: Non-isolated TTL output.
The RT430 has 2 Ethernet 10/100BaseT (auto-negotiation) communication interfaces
with RJ45 connectors, and the RT434 has 4 Ethernet 10/100BaseT (auto-negotiation)
ports.
When a CAT5 cable with RJ45 connector is plugged in each port, the L
indicate that the cable is transmitting signal, and the A
data exchange.

Figure 21: Event input

CTIVITY
Chapter 4 – Installation
led will
INK
led blinks when there is
RT430/434