Table 34: Safety Tests; Table 35: Environmental Tests - GE Reason RT430 Technical Manual

Chapter 8 – Technical Specification
RT430/434
CISPR22:2008

Table 34: Safety tests

IEC 61010-1
CE Certification
IEC 60255-5

Table 35: Environmental tests

IEC 60068-2-1
IEC 60068-2-2
IEC 60068-2-30
IEC 60068-2-14
IEC 60255-21-1
IEC 60255-21-2
IEC 60255-21-3
Radiated emission
The definition of the limit frequency is based
on the maximum internal frequency of the
equipment. On RT430/434, the maximum
internal frequency is 100 MHz. For this case,
the levels of CISPR 11 satisfy the normative IEC
60255-26.
Conducted emission
0.15 to 0.50 MHz - 79dB (μV) quasi peak; 66 dB
(μV) average
0.5 to 30 MHz - 73dB (μV) quasi peak; 60 dB
(μV) average
Safety Requirements
Impulse: 5 kV
Dielectric withstand: 3.3 kVdc
Insulation: > 100 MΩ
-40°C, 16 hours (Cold)
+85°C, 16 hours (Dry heat)
95% no condensation, +55°C (Damp heat)
-40°C to +85ºC / 9 hours / 2 cycles (Change of temperature)
Class 2 (Vibration)
Class 1 (Shock)
Class 2 (Seismic)
RT430/434
77