Flowserve PMV D3 User Instructions page 27

The Shift Menu is used to choose between the basic menu and the full menu.
The menu contents are shown in the figures
on the right and the various texts are described
below:
No Full menu selected.
Yes Basic menu selected.
The Status Menu is used to select whether or not the positioner is in service.
The menu contents are shown in the figures
on the right and the various texts are
described below:
o o service
in service
Not in service. Flashing
indicator in upper left-
hand corner of display.
Positioner in service.
Critical parameters
cannot be changed.
PMV D3 Digital Positioner
BASIC MENU
SHIFT MENU
Full Menu can be locked with a
passcode, see Setup menu.
FULL MENU
STATUS
When changing between In
service and Out of service,
the OK button must be
pressed for 3 seconds.
27
FCD PMENIM0001-06 A5 09/16
Full menu
OK
no
Full menu
OK
yes
STATUS
o o service
STATUS
in service
OK
OK