Table of Contents
Advertisement
Lattice Semiconductor
Download Demo Designs
The Pico Power demo is preprogrammed into the Pico board, however over time it is likely your board will be modi-
fied. Lattice distributes source and programming files for demonstration designs compatible with the Pico board.
To download demo designs:
1. Browse to the ispMACH 4000ZE Pico Development Kit web page (www.latticesemi.com/4000ze-pico-kit) of the
Lattice web site. Select the Demo Applications download and save the file.
2. Extract the contents of Pico_DK_DemoSource.zip to an accessible location on your hard drive. Three demo
design directories (Demo_<device>_<demo>) are unpacked.
Where:
• .\project – ispLEVER Classic project (.syn) or PAC-Designer project (.pac) and programming file (.jed). This
directory may contain intermediate results of the ispLEVER Classic or PAC-Designer compile process.
• .\source – HDL source files for the ispLEVER Classic project.
• .\testbench – HDL test fixture for the ispLEVER Classic project.
Recompile a LC4256ZE Demo Project with ispLEVER Classic
Use the procedure described below to recompile any of the LC4256ZE demo projects for the Pico Evaluation
Board.
1. Install and license ispLEVER Classic software.
2. Download the demo source files from the ispMACH 4000ZE Pico Development Kit web page.
3. Run the ispLEVER Classic Project Navigator.
4. Open the <demo>.syn project file.
5. From the Source in project window, select the target device. The Fit Design process appears in the Processes
for current source window.
6. Select Fit Design, right-click and choose, Start. After a few moments the JEDEC programming file is output.
7. See the Programming with ispVM section of this document for details on downloading a programming file to the
board.
Recompile a POWR6AT6 Demo Project with PAC-Designer
Use the procedure described below to recompile any POWR6AT6 demo project for the Pico Evaluation Board. The
POWR6AT6 has limited I/O access so trim output features are limited. The only programmable option that can be
2
modified is the I
C address.
Demo
picopower-demo
.\project
Pico Power
.\source
.\testbench
gpio-demo
.\project
I2C GPIO Expansion
.\source
.\testbench
supplymonitor-demo
Both
.\project
11
ispMACH 4000ZE Pico Development Kit
Directory
User's Guide
Advertisement
Table of Contents
