Traveling Waves Recorder; Figure 35: Traveling Waves Recorder - Triggered Recording Configuration Section - GE RPV311 Technical Manual

RPV311
12

Traveling Waves Recorder

Figure 35: Traveling waves recorder – triggered recording configuration section
RPV311-TM-EN-7
A The E check box allows user to enable the continuous disturbance reordering
NABLED
feature.
B The D
ERIVED QUANTITY
continuous disturbance records.
C The <D > button allows user to deselect magnitudes selected.
ESELECT ALL
It is possible only to enable the disturbance continuous recorder if the fault
continuous recorder is disabled. It is not possible to use both recorders
simultaneously.
The RPV311 allows user to configure a traveling wave recorder for fault location, by
trigger. To start the configuration, it is necessary add a new recorder in accordance
with the position of selected links in equipment.
Once created, the traveling wave recorder can be configured as per the section
shown in Figure 35.
A The E check box allows user to enable the fault recorder feature.
NABLED
scroll box allows user to select the derived quantity of
Chapter 4 – Configuration
81