Ra332; Figure 6: Rear View Of The Ra332 - GE RPV311 Technical Manual

RPV311
2.3

RA332

2.3.1 Key Features
2.3.2 Components
40
F Front Panel Indicators: Mains lights up when the module is powered-up. Ready
indicator lights up after the module self-test is completed. The Link1 indicator lights
up when active.

Up to 16 analog inputs (voltage, current, DC transducers, probes);

Up to 32 digital inputs;

16-bit analog-to-digital converters, 256 points-per-cycle sampling rate;

Frequency response of DC to 3.0 kHz;

Fiber-optic interface to connect to the processing module;

Up to 2 km fiber-optic links;

Front panel mounting or internal panel mounting.
Figure 6 shows all the components of the RA332 module.

Figure 6: Rear view of the RA332

A AC or DC power input.
B Mains and Ready back panel indicators: Mains is lit when the module is powered-
up. Ready indicator lights up after the module self-test is completed.
C Up to 16 analog inputs for voltage, current, or DC transducers, identified as 101 to
116.
Chapter 3 – Hardware Design
RPV311-TM-EN-7