Figure 10: Equipment Ethernet Configuration Section - GE RPV311 Technical Manual

Chapter 4 – Configuration
50

Figure 10: Equipment Ethernet configuration section

A The IP text field allows user to enter the equipment's IP address.
B The N
ETWORK MASK
equipment is connected.
C The B text field allows user to enter the sub network broadcast address to
ROADCAST
which the equipment is connected.
D The IP text field allows user to enter the equipment's IP address.
E The P scroll box allows user to select the communication port of the equipment
ORT
used as gateway.
Ethernet 1 and Ethernet 2 can be configured.
The Ethernet port enables the RPV to connect to the TCP / IP / UDP / IP networks.
The RPV311 allows point-to-point communication with a conventional modem,
cellular phone, GPRS and radio links. The Serial Port can be configured by accessing
the section shown in
text field allows user to enter the subnetwork mask to which the
Figure 11.
RPV311
RPV311-TM-EN-7