GE RPV311 Technical Manual page 173

RPV311
1.3.3 How to Use It
1.3.4 Web Browser Configuration
1.3.5 Receiving Equipment Configuration
1.3.6 Importing Equipment Configuration
RPV311-TM-EN-7
To open the Configuration Tool, double click on the Conftool icon and wait while
default Web browser is opening.
To close the Configuration Tool, close the Web browser window.
The Configuration Tool runs on a Web browser (Internet Explorer or Mozilla Firefox).
Before using it for the first time, it is necessary to configure some security
parameters of the Web browser and the Flash Player. To perform the configuration,
follow these steps:
In the configuration tool window, right click and select Global Settings. The Adobe
Flash Player Settings will open;
Click on Trusted locations settings. The window will open;
Click on Add and then click on Browse for folder, find the RPV folder, then click it and
after that click on the <OK> button.
Close the Flash Player Help window.
To be able to receive an equipment configuration, the user must be connected to the
equipment by Ethernet or modem interface.
Double click Conftool icon. The Configuration Tool interface will open in the default
Web browser;
Click on the <R > button. A new window will open;
ECEIVED
Type IP address of the equipment and click on the <OK> button. An RPV-like
configuration interface will open. It is possible to check the configuration parameters
as if user were on-line with the equipment;
Change the configuration if necessary;
Click on the <S > button. A new window will open and require a name for this
AVE
configuration. Type the configuration name (maximum of 22 characters including _, -,
0-9, a-z and A-Z);
Click on the <S > button once again to save the new configuration on the PC;
AVE
Click on the <F > button to go back to the main screen of the Configuration Tool.
INISH
The configuration will be on the list of locally stored configurations.
The configuration window will appear in the Configuration Tool. The user can choose
to edit the configuration again, store it or transmit it to the RPV.
It is possible to save the configuration with the same name as an existing one.
However, the existing configuration will be overwritten.
It is possible to import a configuration previous saved on the computer. To import a
configuration, the exported configuration XML file has to be first stored in the folder
C:\RPV\conftool\conf and then proceed as follows:
Chapter 12 – RPV Tools
173