Chapter 13: Software - Rpv Manager; Requirements; Software Description; Rpv Manager Main Window - GE RPV311 Technical Manual

RPV311
Distributed Multifunction Fault Recorder
Chapter 13: Software – RPV Manager
1

Requirements

2

Software Description

2.1

RPV Manager Main Window

2.1.1 System Monitor
The RPV Manager is a tool that allows data management of the equipment.
The RPV Manager Installer works on Microsoft Windows and needs .NET 4 (client
profile) to run. It also depends on a database engine, Sql Compact Edition 3.5. The
user must have administrative rights to install the software.
The software is supported on Windows 7.
This manual refers to RPV Manager version 07A00.

Figure 85 - RPV Manager main window

The software main tab is called System Monitor. All the substation and RPV311
configured in the software are listed in a tree menu on the left corner of the window.
The top level of the tree shows the user created facilities and the equipment
installation on the second level.
After clicking on the device with the left mouse button, the equipment records will be
loaded and displayed in tabs depending on the type of record selected (Fault,
Disturbance, Traveling Wave, Steady-State or Sequence of Events). This information is
updated after a Refresh.