Compliance; Functional Overview - GE RPV311 Technical Manual

RPV311
6

Compliance

7

Functional Overview

20
Up to 8 fiber-optic links to connect to RA331, RA332 or RA333 remote

acquisition modules;

Fan-less and no rotating part design

Trigger waveform recorder at 256, 128, or 64 points-per-cycle;

Continuous waveform recorder at 16 points-per-cycle;

Continuous disturbance recorder and trigger recorder (optional);

IRIGB-004 and SNTP/NTP version 2, 3 or 4 time synchronization

Trigger using Boolean logic equations;

Traveling wave recorder for fault location (optional);

MODBUS and DNP3 interface for SCADA integration (optional);

Synchrophasor measurement according to IEEE C37.118 (optional);

Power quality records:

Historical average at aggregation intervals of 1 or 10 minutes (optional);

Measurement and recording of harmonics up to the 50th order according to IEC
61000-4-7 (optional);

Measurement and recording of flicker according to IEC 61000-4-
15:1997+A1:2003 (optional);

Cross-trigger using standard network connection;

One-end fault location based on Takagi algorithm;

Flexible communication:

Two 10/100BaseT electrical Ethernet interfaces;

Two embedded optical Ethernet converters;

RS232 serial port for modem connection;

Support for IEC 61850:

Up to 320 binary inputs related to IEC 61850-8-1 GOOSE messages (optional);

Two Ethernet ports for redundant connection (optional);

One Ethernet port for Process Bus (IEC 61850-9-2LE Sampled Values) connection
(optional).

Local interface on the front panel;

4 dry-contact relays for remote signalling;

Fax and/or e-mail message after detection of a trigger. The fax can be sent to
two different destinations and the e-mail to four different destinations (optional).
The device has undergone a range of extensive testing and certification processes to
ensure and prove compatibility with all target markets. A detailed description of
these criteria can be found in the Technical Specifications chapter.
Chapter 1 – Introduction
RPV311-TM-EN-7