Voltage Circuit; Figure 21: Email/Fax Configuration - GE RPV311 Technical Manual

Chapter 4 – Configuration
3

Voltage Circuit

62

Figure 21: Email/Fax configuration

Considering the input type configurations, it is possible to create voltage circuits with
1, 2, 3, or 4 elements.
The circuit sequences supported by the equipment are ABC, BCA, CAB, CBA, BAC, and
CBA and may be customized by the user in the equipment setup. The default
sequence is ABC.
To add a new voltage circuit select the V
following:
The I text field allows user to enter a single code for the circuit being defined
DENTIFIER
(maximum 15 characters). No editing allowed;
The W scroll box allows user to select a number of elements used for measuring
IRING
(1, 2, 3, or 4). No editing allowed;
Selecting the 3-
PHASE CIRCUIT SYNTHESIS
enabled. It is only possible to select 3-phase circuit synthesis in a 1 element circuit
(phase A, B, or C);
C section and fill in the
OLTAGE IRCUITS
check box, the 3-phase circuit synthesis is
RPV311
RPV311-TM-EN-7