Figure 5-4 Sample Ip Addresses For A Tcpi/Ip Lan-To-Lan Connection - ZyXEL Communications Prestige 642 User Manual

In this case, only one set of VPI and VCI numbers need be specified for all protocols. The valid range for
the VPI is 1 to 255 and for the VCI is 32 to 65535 (1 to 32 is reserved for local management of ATM
traffic).
The following diagram explains the Sample IP Addresses to help you to understand the field of My Wan
Addr in Menu 11.3. Refer to Figure 3-3 LAN & WAN IPs for a brief review of what a WAN IP is. My
WAN Addr indicates the local Prestige WAN IP while Rem IP Address indicates the peer WAN IP.
Remote Network
192.168.1.0
192.168.1.1
172.16.0.2
Prestige

Figure 5-4 Sample IP Addresses for a TCPI/IP LAN-to-LAN Connection

To configure the TCP/IP parameters of a remote node, first configure the fields in Menu 11 – Remote
Node Profile, as shown in the next table. For more details on the IP Option fields, refer to Chapter 3.
Remote Node TCP/IP Configuration
Prestige 642 ADSL Internet Access Router
10.0.0.1
172.16.0.1
DSL/
ATM
ADSL Lines
10MB
Local Network
10.0.0.0
Prestige
5-3