Table of Contents
Advertisement
SNMP (Simple Network Management
The SNMP is a protocol governing network management and the monitoring of network devices and their
functions. The Prestige 100L supports the utilization of SNMP to regulate the communication that occurs
between the manager station and the agent stations in a network. Basically, your Prestige, when connected
to the LAN, acts as an agent station. In this way, the manager station on your LAN can monitor your
Prestige as it would another station on the network. Keep in mind that SNMP is only available if TCP/IP is
configured.
Configuring Your Prestige For SNMP Support
The following steps describe a simple setup procedure for configuring SNMP management.
1. From the Main Menu, select option 22. SNMP Configuration. This brings you to Menu 22 – SNMP
Configuration.
2. You are prompted to enter the following information. Steps 3 to 7 describe the specific parameters
involved in the configuration. The parameters you have to fill in are indicated in bold type.
SNMP
This chapter takes you through SNMP Configuration Menu 22.
Menu 22 – SNMP Configuration
SNMP
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel
Figure 7-1
Menu 22 – SNMP Configuration
Prestige 100L IDSL Router
Chapter 7
Protocol)
7-1
Advertisement
Table of Contents
Troubleshooting
