Use Ptt Vibrate; Transmit On The Priority Channel; End A Ptt Call; Change The Ptt Volume - Avaya 3641 User Manual

Use PTT Vibrate

To enhance the alerting of a PTT call,
PTT Vibrate
When
broadcast is received, whether the handset is in standby or in a call. If in a call, the chirp
alert will also sound. The vibration does not replace any PTT tone volume already set.
To set the handset for PTT vibrate only, enable
zero.
PTT Vibrate
is disabled by default.

Transmit on the Priority Channel

Press and release the
TALK
hold , then speak. The priority channel takes priority over all other calls in progress.

End a PTT Call

END
Press the

Change the PTT Volume

Press the up/down volume buttons on the side of the handset while receiving a PTT call.

Answer a Telephone Call during a PTT Transmission

START
Press the

Start a Telephone Call during a PTT Transmission

START
Press the
telephone call.

Turn off PTT

Change to a different profile. (The
Avaya 3641/3645 IP Wireless Handset SIP User Guide
Using the Push-to-talk Features of your Avaya 3645 IP Wireless Handset
is enabled, the handset will vibrate three times whenever a PTT
TALK
button. Select the priority channel from the list. Press and
key to exit the PTT call.
key. PTT transmissions will be pre-empted by the telephone call.
key and dial the number. PTT transmissions will be pre-empted by the
Silent
PTT Vibrate
may be enabled on the
PTT Vibrate
and set the tone volume to
Vibrate
and profiles disable PTT by default.)
Config
menu.
June 2012 59