Advertisement
23- Decoration / Aufkleber
L/R
Sticker
Sticker
YELLOW SCHEME
VQA037Y
Sticker
YELLOW SCHEME
VQA037Y
Sticker
L/R
Antenna (plywood)
CA
Sticker
Sticker
L/R
VQA037Y / VQA037W / VQA0371
WHITE SCHEME
VQA037W
L/R
L/R
1
2
CA
VQA037Y / VQA037W / VQA0371
Note: Cut out the stickers and apply them in the proper area. Do not peel the backing paper off all at once.
Peel off one corner of the backing and cut off with scissors. Arrange sticker on model and when satisfied
adhere the corner without backing.
Carefully peel back the rest of the backing while at the same time adhering the rest of the sticker.
Try not to make air bubbles, if there are some, carefully puncture sticker (center of bubble) but not model
surface with the tip of the knife or sharp pin and squeeze out the air. At curves stretch sticker and apply a little
heat so that no ceases occur. Cut off the excess that is produced.
Advertisement
Need help?
Do you have a question about the VQA037Y and is the answer not in the manual?