Software Control - Vdwall LedSync820C User Manual

LedSync820C User's Manual
2） Select output brightness
Button names
BRT -
BRT +
LedSync820C supports 8 levels Brightness, "1" represents the
lowest brightness, 8 represents the highest brightness. When
brightness is adjusted to be "1", "3", "5" or "7", their LED indicators
will blink; When brightness is adjusted to be "1", "3", "5" or "7", their
LED indicators will keep illumed.
3） Select image status
Button names
DEF
STD
4） Select FULL/PART display (FULL, PART)
Button names
FULL
PART
3、 Software Control:
LedSync820C
software, including:
 Switch input signal source, change brightness of output
images.
 Manually operate and control it or edit operation and control
schedule to make it executed automatically.
 Carry out site control, or remote control over LAN or WAN.
For details please refer to LedSync82xx Timer.
---------------------------------------------------------------------------------------------------
VEGAS LED SCREENS - LED VIDEO PROCESSOR
Vegas LED Screens
Description
Decrease
LedSync820C
Increase
LedSync820C
Description
Select user-defined image parameters, including
GAMMA value, Video Chrom and Hue. User can
define custom parameters using PC software.
Select a standard image status to output image.
This standard image has been preset at factory,
including GAMMA =1, Video Chrom and Video
Hue = standard values. User can't modify these
standard values.
Description
FULL means that LED will display a full picture.
PART means that LED only display a part of a
picture.
is supplied
, user can operate and control LedSync820C using this
output image
output image
with Timing
brightness of
brightness of
Control software
8