Plug The Transformer Into The Outlet; Close The Unit; Set The Unit Master Code - Chamberlain EL1SS Installation And Programming Manual

INTRODUCTION

PLUG THE TRANSFORMER INTO THE OUTLET

Plug the transformer into the 110 Vac outlet.

CLOSE THE UNIT

Rotate the front panel up. Lock the front panel.

SET THE UNIT MASTER CODE

Enter: # # # on the unit's keypad.
Enter 4 digit Master Code. Example: 1234.
? ? ?
"BEEP" "BEEP"
Write down the Master Code and store in a secure location. See page 23.
NOTE: The star (*) button acts as a cancel command that will end any call, programming or access code key sequence.
INSTALLATION
?
TESTING
12 Vac
Power (included)
110 Vac Outlet
NOTE: Once power is applied, the EL1SS will begin to click to
indicate that it is powered, and is waiting to be programmed for
the unit's Master Code. The Master Code is used to unlock the
programming functions of the EL1SS. The Master Code should not
be distributed as a User Code.
12
PROGRAMMING
2
1
POWER
Check the Power LED
is illuminated.