Wiring A Gate Operator (Normally Open); And A Maglock (Normally Closed) - Chamberlain EL1SS Installation And Programming Manual

INTRODUCTION
WIRING A GATE OPERATOR (NORMALLY OPEN) & A MAGLOCK
(NORMALLY CLOSED)
The maglock can be connected to Relay 1 or Relay 2. See the
Programming section for information about configuring Relays 1
and 2.
DC Power
NOTE: Install a 1N4001
diode or equivalent.
INSTALLATION
Maglock
NOTE: Do not use
the unit's power
supply for the maglock.
COM (Common)
NC (Normally Closed)
TESTING
NO
COM
(Normally Open)
(Common)
9
PROGRAMMING
Primary Gate Operator
(Strike Open Input)