Telephone Commands - Chamberlain EL1SS Installation And Programming Manual

INTRODUCTION

TELEPHONE COMMANDS

FROM LOCAL TELEPHONE
TRIGGER RELAY 1
Enter the command tone:
TRIGGER RELAY 2
Enter the command tone:
ENABLE PARTY MODE (RELAY 1)
Enter the command tone:
To disengage party mode: Enter "*9" into the local
telephone.
ENABLE "DO NOT DISTURB" MODE
Enter the command tone:
DISABLE "DO NOT DISTURB" MODE
Enter the command tone:
INSTALLATION
9
5
0 4
1 1
1 2
TESTING
FROM FORWARDED TELEPHONE
ACCEPT CALL FROM UNIT ON REMOTE TELEPHONE
Enter the command tone:
Extend talk time: "Talk" or press
TRIGGER RELAY 1
Enter the command tone:
TRIGGER RELAY 2
Enter the command tone:
CALL WAITING
Press "Flash" once to answer guest, Once again to return to
outside call on telco line, if
9
pressed. If (relay 1) or
pressed, the EL1SS will automatically return to the telco
line.
17
PROGRAMMING
0
0
9
5
9 5
or is not
5
(relay 2) is