Telephone Programming - Chamberlain EL1SS Installation And Programming Manual

INTRODUCTION
ENGAGE PARTY MODE (RELAY 1)
Party Mode will latch relay and trigger corresponding
channel.
1. Enter the Master Code:
2. Enter the Program Code:
To disengage party mode: Enter a valid code into the EL1SS
keypad or enter "*9" into the local telephone.
ENGAGE PARTY MODE (RELAY 2)
Party Mode will latch relay and trigger corresponding
channel.
1. Enter the Master Code:
2. Enter the Program Code:
To disengage party mode: Enter a valid code into the EL1SS
keypad or enter "*5" into the local telephone.
NOTE: Relay 2 must be in Independent Control Mode to
engage Party Mode on relay 2. See page 13.

TELEPHONE PROGRAMMING

ENABLE INTERCOM MODE
Enter the command tone:
ENABLE TELCO MODE
Enter the command tone:
ENABLE STANDARD (LONG) RING TONE
Enter the command tone:
ENABLE ALTERNATE (DUAL) RING TONE (DEFAULT)
Enter the command tone:
NOTE: Alternate ring tone function may not work with
all phones.
INSTALLATION
? ? ? ?
5 4
? ? ? ?
5 6
TALK
1
4
7
0 3
0 7
1 4
1 5
TESTING
CALL FORWARD PROGRAMMING
ENTER CALL FORWARDING TELEPHONE NUMBER
Enter the command tone:
#
VERIFY CALL FORWARDING NUMBER (VIA CALLER ID)
Enter the command tone:
Hang up the phone - Wait for the ring.
ERASE THE CALL FORWARDING NUMBER
Enter the command tone:
NOTE: This command will also disable the call
forwarding mode.
ADJUST "PICK UP" RING COUNT
12:00
AM
1. Enter the command tone:
Dec. 31
MENU REDIAL
OFF
2. Enter the ring count:
FLASH
2 3
&') ABC DEF
5 6
GHI JKL MON
8 9
PQRS TUV WXYZ
0 #
OPER
ENABLE ALTERNATE DTMF PROGRAMMING
This feature changes the first programming digit from
#
to
Enter the command tone:
DISABLE ALTERNATE DTMF PROGRAMMING
Enter the command tone:
ENABLE CALL FORWARDING
Enter the command tone:
DISABLE CALL FORWARDING
Enter the command tone:
16
PROGRAMMING
Up to a 14 Digit Telco Number
0
#
1
2 5
through
1
# 1
0
0
#
6
8
0
3
6
1
2