Download Print this page
Chamberlain Elite EL25 Instruction Manual

Chamberlain Elite EL25 Instruction Manual

El25 - resident instructions manual
Hide thumbs Also See for Elite EL25:

Advertisement

How a Visitor Contacts the Resident:
Single Family Residence: When a visitor presses the "CALL" button, the system rings your telephone.
Lyl
War
Visitor presses call button to contact resident
Multi-Tenant Complex: A visitor enters your Directory Code on the unit keypad. The system dials your telephone number. The
visitor never sees your telephone number.
Lyl
War
Visitor presses call button to contact resident
When You Answer the Visitor's Call
The call time is limited. When 10 seconds of talk time remain
the unit will emit 10 beeps. After access has been granted or
denied, the system will automatically end the call to ensure the
system is available to other visitors.
CALL WAITING (Single Family Residence ONLY):
Press "2" on your telephone keypad to toggle between
another telephone call and the visitor call at the gate/door.
GRANTING ACCESS:
If you are opening a door, the system will unlock it for a
preset period of time. The system will also emit audio
feedback or play a message.
Resident can grant access to visitor by pressing "9"
or deny access by pressing "4" on the resident telephone
Resident can grant access to visitor by pressing "9"
or deny access by pressing "4" on the resident telephone
Extend Talk Time
Activate ALL Entry
Devices on Door #4
Relay(s)
Hang Up and
Deny Access to
the Visitor
Resident Instructions
for EL Models
Visitor gains entry
Visitor gains entry
Toggle Between Visitor
Activate ALL Entry
and Another Phone Call
Devices on Door #3
Relay(s)
Activate ALL Entry
Devices on Door #2
Relay(s)
Activate ALL Entry
Devices on Door #1
Relay(s)

Advertisement

loading

Summary of Contents for Chamberlain Elite EL25

  • Page 1 Resident Instructions for EL Models How a Visitor Contacts the Resident: Single Family Residence: When a visitor presses the “CALL” button, the system rings your telephone. Visitor presses call button to contact resident Resident can grant access to visitor by pressing “9” Visitor gains entry or deny access by pressing “4”...
  • Page 2 Resident Instructions (continued) Using Entry Codes An Entry Code allows access to a controlled area by entering a numeric code on the unit keypad. Enter your assigned Entry Code (3-9 digits). If you make an error while entering your code, press “✱” to cancel. Speaking Through the Unit: This feature is used to initiate communications from the resident phone through the unit at any time.
  • Page 3 Resident Instructions (continued) 121 122 123 124 125 126 Direct Command (Single Family Residence ONLY): Direct command allows you to control the unit from the residence phone. Press from the residence phone. The unit is now prepared to accept a direct command. Enter the Unit ID code (if applicable).
  • Page 4 ® 2006, Chamberlain Elite 114A2997C All Rights Reserved Printed in USA...

This manual is also suitable for:

Elte el series