Life Gear 26280 Owner's Manual page 8

Tool:
30
14
64
Multi Hex Tool with Phillips Screwdriver
30
3
14
2
1
18
6
17
17
2. Front and Rear Stabilizers Installation
Install two Adjustable Levelers (6) with two M10 Nuts (18) onto the Rear Stabilizer (3).
Position the Front Stabilizer (2) in front of Front Main Frame (1) and align bolt holes.
Attach the Front Stabilizer (2) onto the front curve of the Front Main Frame (1) with two
M8x70mm Carriage Bolts (17), two Ø20xØ8x2.0t Washers (14), and two M8 Cap Nuts (30).
Tighten cap nuts with the Multi Hex Tool with Phillips Screwdriver provided.
Position the Rear Stabilizer (3) behind the Rear Main Frame (67) and align bolt holes.
Attach the Rear Stabilizer (66) onto the rear curve of the Rear Main Frame (64) with two
M8x70mm Carriage Bolts (17), two Ø20xØ8x2.0t Washers (14), and two M8 Cap Nuts (30).
Tighten cap nuts with the Multi hex Tool with Phillips Screwdriver provided.
Hardware:
4 Carriage Bolts (M8x70mm) 4 Washers (Ø20xØ8x2.0t) 4 Cap Nuts (M8)
7