Life Gear 26280 Owner's Manual page 11

5
19 10
10
19
5. Back/Seat Support Bracket and Seat Sliding Tube Installation
Remove eight M8x15mm Bolts (19), eight Ø16xØ8x1.5t Washers (10), and the Seat Sliding
Tube (65) from the Back and Seat Support Bracket (5). Remove bolts with the S6 Allen
Wrench provided.
Insert the Seat Sliding Tube (65) into the Bushings (15) of the Rear Main Frame (64).
Attach the Seat Sliding Tube (65) to the Back and Seat Support Bracket (5) with eight
M8x15mm Bolts (19) and eight Ø16xØ8x1.5t Washers (10) that were removed. Tighten
bolts with the S6 Allen Wrench provided.
Adjust the seat position and insert the Round Knob (48) and Triangle Knob (53). Turn the
Round Knob (48) and Triangle Knob (53) in the clockwise direction to tighten.
10 19
19
10
65
48
53
Tool:
15
64
10
Allen Wrench S6