Life Gear 26280 Owner's Manual page 13

5
71
70
71
70
7. Seat and Back Cushions Installation
Remove eight M6x15mm Bolts (70) and eight Ø18xØ6x1.5t Washers (71) from the back of
the Seat and Back Cushions (61, 59). Remove bolts with the Multi Hex Tool with Phillips
Screwdriver provided. Then attach the Seat and Back Cushions (61, 59) onto the Back
and Seat Support Bracket (5) with eight M6x15mm Bolts (70) and eight Ø18xØ6x1.5t
Washers (71) that were removed. Tighten bolts with the Multi Hex Tool with Phillips
Screwdriver provided.
․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․
62
63
8. Computer Installation
Remove four M5x10mm Bolts (42) from the Computer (62). Remove bolts with the Multi
Hex Tool with Phillips Screwdriver provided.
Connect the Sensor Extension Wire (63) and Hand Pulse Sensor Extension Wires C (78)
from the Front Post (7) to the wires that come from the Computer (62). Tuck wires into the
Front Post (7).
Attach the Computer (62) onto the top end of the Front Post (7) with four M5x10mm Bolts
(42) that were removed. Tighten bolts with the Multi Hex Tool with Phillips Screwdriver
provided.
59
61
78
42
7
Tool:
Multi Hex Tool with Phillips Screwdriver
Tool:
Multi Hex Tool with Phillips Screwdriver
12