Changing Video Settings; Stopping The Transmission Of Your Video For All Calls; Changing The Clarity Of Your Video - Polycom VVX 500 User Manual

For detailed instructions, please refer to 8x8 Virtual Room documentation at:
http://www.8x8.com/Support/BusinessSupport/Documentation.aspx.
Changing Video Settings
When you update video settings, you change the way all video calls display—not just the call you're in.
You can update when and how video displays by doing the following:
• Stopping the transmission of your video for all calls
• Changing the clarity of your video
• Changing how you view all video calls
• Setting the call rate for all video calls
Note: Updated Video Settings Don't Apply to the Current Call
If you update settings during a call, the new settings will apply to the next call, not the current
call.
Stopping the Transmission of Your Video for All Calls
You can stop your phone from automatically transmitting your video at the start of all calls.
To enable or disable the transmission of your video for all calls:
1 Tap Settings from Home view, and tap Basic > Video > Video Call Settings.
2 From the Video Call Settings screen, tap Auto Start Video Tx, and either enable or disable the
setting.
When enabled, your phone automatically transmits video at the start of all calls. When disabled,
your phone won't automatically transmit video at the start of all calls, and
your video during video calls. The default setting is Enabled.
Changing the Clarity of Your Video
You can change the clarity of your video, including the brightness, contrast, and sharpness of your video
stream. If your camera faces a bright light source, such as a bright window, you may need to increase
the camera's brightness, contrast, and sharpness levels so the far side can see you better. To see how
you look to the far side, view the PIP.
Chapter 3: Using Video and the Polycom VVX Camera
will display next to
81