Changing How Non-Pip Video Displays - Polycom VVX 500 User Manual

If you want, you can enable your phone to display all incoming video on the full screen, as shown next.
To display all incoming video on the full screen:
1 Tap Settings from Home view and tap Basic > Video > Video Call Settings.
2 From the Video Call Settings screen, tap Auto Video Full Screen, and enable the setting.
When enabled, this setting automatically enables your phone to display far-side video on the full
screen. When disabled, far-side video will display in the smaller call window. The default setting is
Disabled.
3 Tap Save.
Changing How Non-PIP Video Displays
You can adjust the appearance of non-PIP video so that it displays normal, full, or cropped video:
• Normal—The video is displayed using correct proportions. If necessary, black bars appear on the
top, bottom, or sides of the area to maintain the correct aspect ratio.
• Full—If the received video image is not the same aspect ratio as the phone's display area, the
video image is stretched to fill the area. (If the aspect ratios match, no stretching occurs.)
• Cropped—Black bars don't appear, and the video is re-sized to maintain the correct aspect ratio.
Any parts of the video that don't fit within the area are cropped.
You can select different settings for video that displays on the full screen and in the call window.
The following pictures show how normal, full, and cropped modes display in the call window.
Chapter 3: Using Video and the Polycom VVX Camera
83