The Bluetooth/Headset
icon, the Bluetooth Settings screen displays.
You can now use your headset to handle calls.
Handling Calls with Your Bluetooth Headset
If your Bluetooth headset is turned on, and paired and connected with your phone, you can:
• Use the headset to handle calls, including muting and adjusting call volume.
• Initiate and end calls on your headset by pressing
• Switch to handset or speakerphone mode during a headset call by picking up the handset or
pressing
.
If a Bluetooth headset is paired and connected, and then you turn the headset off, the message
Headset removed displays. The headset won't be connected anymore, but it will still be paired. When
you turn the headset back on, the message Headset attached displays, and the headset will be
connected again—indicating that you can use it to handle calls.
Disconnecting and Removing Your Bluetooth Headset
You can disconnect your headset from your phone, but still keep it paired. When you disconnect a
headset, it remains paired so you can easily connect it to your phone again.
You can also remove your headset, so it's no longer paired or connected. When you remove your
headset, it won't display in the Manage BT Headsets screen. To connect it back to your phone, you'll
need to scan for the device, add it, and connect it again.
icon will also display in the status bar, as shown next. If you tap the
Chapter 2: Using Basic Features
, or using a control on the headset.
33
Need help?
Do you have a question about the VVX 500 and is the answer not in the manual?