Treadmill Overview; Power Switch; Circuit Breaker Reset; Powercord - SteelFlex XT-2700 User Manual

T
READMILL
P S
OWER WITCH
The power switch is located in the front of the treadmill near the powercord.
The power switch has two positions -ON and OFF. The display console will
beep when the treadmill is plugged in and the power switch is pressed ON.
C B
IRCUIT REAKER
The circuit breaker is located next to the power switch. If there should be an
electrical overload due to a surge in electricity or other situation, the circuit
breaker will disconnect and attempt to prevent any damage from occurring
to the treadmill.
If the treadmill suddenly stops with no lights visible nor beep heard, the
circuit breaker may need to be reset. To reset the circuit breaker press the
button firmly. The display console should restart and a beep should be heard.
CAUTION:
P
OWERCORD
The powercord, located in the front of the treadmill must be plugged into a
properly grounded electrical outlet.
Locate the powercord so it will not come in contact with the wheels of the
treadmill during operation. This may cause the powercord to become
pinched or damaged. Damage to the powercord could result in a fire hazard
9
XT-3200/3300/3600/4600
4800/5600/5700 Treadmill
O
VERVIEW
R
ESET
Feel the powercord with your hands. If the
powercord is warm to the touch a problem
may exist with the electrical outlet in which
the treadmill is plugged. It may be necessary
to plug the treadmill into a different outlet.