The Speed Arrow Buttons - SteelFlex XT-2700 User Manual

S A
PEED RROW
Press the Speed + Arrow button to increase the running belt speed and
the Speed - Arrow button to decrease the running belt speed to the desired
setting. As the buttons are pressed the Speed window will display the value
in miles per hour (MPH). Increase the running belt speed value in
the Speed window to a known comfortable speed and let the running
belt reach that speed before increasing it.
TIP:
Note:
CAUTION:
DO NOT continually press the Speed + Arrow button to increase the belt.
Enter a known, comfortable value and wait for the running belt to reach
that speed. Use care when further increasing the speed.
Use either the Speed or Incline Arrow buttons to increase or decrease
the weight setting shown in the Feedback window.
After the weight value has been adjusted press the Enter button.
17
XT-3200/3300/3600/4600
4800/5600/5700 Treadmill
B
UTTONS
The speed may be increased or decreased
at any time during the workout.
Typically, the preprogrammed workout is
chosen and starts at 0.5 MPH and is then
increased to the desired speed.
DO NOT OVER-INCREASE SPEED!
As the button is pressed, the Belt-speed
value shown in the Speed window will increase
immediately. The running belt will increase to
this speed gradually. If a speed value is entered
that is too high for the user's capabilities,
personal injury may occur.