Grounding Instructions; Leveler Legs - SteelFlex XT-2700 User Manual

Grounding Instructions

The treadmill must be properly grounded prior to use. Proper
grounding reduces the risk of shock or damage to the treadmill.
The powercord's plug is equipped with a grounding conductor
that must be used with an electrical outlet installed in accordance to
all local codes and ordinances.
DO NOT use a temporary adapter that bypasses this function.
This will stop the safety equipment from functioning properly and
may void your warranty.
DANGER!
DO NOT MODIFY the plug provided with this product. If it will not fit an
electrical outlet, have a proper outlet installed by a qualified electrician.

Leveler Legs

After finding a location that is suitable for the
treadmill, the rear legs must be adjusted to
provide stable support. Located on the side of
each leg is a thumb-wheel that will allow you to
lower or raise the leg until it is properly seated
on the floor.
WARNING:
While kneeling behind the treadmill, place the heal of your hands on
each side of the treadmill directly above the running-belt adjustment
bolts. Attempt to rock the treadmill by alternately pressing downward
on each side. If you feel even a slight movement on one side adjust
that side until the movement has stopped.
For example, if you feel a slight rocking on the right side, start by
turning the thumb-wheel on the right leg counter-clockwise to lower
the leg until the movement stops.
XT-3200/3300/3600/4600
4800/5600/5700 Treadmill
A risk of electrical shock may result from
improper connection of the equipment-
grounding conductor. Check with a qualified
electrician if you are in doubt as to proper
grounding technique.
DO NOT adjust legs while the treadmill is
on. Turn the power switch to the OFF position.
6