Treadmill Overview - SteelFlex XT-7600 User Manual

TREADMILL OVERVIEW

CONSOLE
POWER SWITCH
The power switch is located in the front of the treadmill near the power
cord. The power switch has two positions ON and OFF. The display
console will beep when the treadmill is plugged in and the power switch is
pressed ON.
CIRCUIT BREAKER RESET
The circuit breaker is located next to the power switch. If there should be
an electrical overload due to a surge in electricity or other situation, the
circuit breaker will disconnect and attempt to prevent any damage from
occurring to the treadmill. If the treadmill suddenly stops with no lights
visible nor beep heard, the circuit breaker may need to be reset. To reset
the circuit breaker press the button firmly. The display console should
restart and a beep should be heard.
CAUTION
Feel the power cord with your hands. If the power cord is warm to the
touch a problem may exist with the electrical outlet in which the treadmill is
plugged. It may be necessary to plug the treadmill into a different outlet.
POWER CORD
The power cord, located in the front of the treadmill must be plugged into a
properly grounded electrical outlet. Locate the power cord so it will not
come in contact with the wheels of the treadmill during operation. This
b20911, 92/ 10/ 1, #70
may cause the power cord to become pinched or damaged. Damage to
the power cord could result in a fire hazard or cause personal injury
through electrical shock.
8
9