Table of Contents
Advertisement
TREADMILL OVERVIEW
POWER SWITCH
The power switch is located on the side of the
treadmill near the power cord. The power
switch has two positions - ON and OFF.
The display console will beep when the
treadmill is plugged in and the power switch is pressed ON.
CIRCUIT BREAKER RESET
The circuit breaker is located next to the power switch. If there
should be an electrical overload due to a surge in electricity or
other situation, the circuit breaker will disconnect and attempt to
prevent any damage from occurring to the treadmill.
If the treadmill suddenly stops with no lights visible nor beep heard,
the circuit breaker may need to be reset. To reset the circuit breaker
press the button firmly. The display console should restart and a beep
should be heard.
CAUTION
Feel the power cord with your hands.If the power cord is warm to
the touch a problem may exist with the electrical outlet in which the
treadmill is plugged. It may be necessary to plug the treadmill into a
different outlet.
POWER CORD
The power cord of the treadmill must be plugged into a properly
grounded electrical outlet. Locate the power cord so it will not
come in contact with the wheels of the treadmills during operation.
This may cause the power cord to become pinched or damaged .
Damage to the power cord could result in a fire hazard or cause
personal injury through electrical shock.
8
Hide quick links:
Advertisement
Table of Contents
