The Incline Arrow Buttons; The Start Button; The Enter Button; The Stop Button - SteelFlex XT-2700 User Manual

I A
NCLINE RROW
Press Incline + Arrow button to increase the grade of the running belt and
the Incline - Arrow button to decrease the grade of the running belt to
the desired setting. As the buttons are pressed the Incline window will
display the value in percentage of grade.
The range of the percentage of grade is 0% to 12%.
TIP: The Incline may be increased or decreased
at any time during the workout.
For more information on percentage of grade please see Incline Window.
S B
TART UTTON
Located in the center of the Display Console it is used to begin a workout
after all of the prompted information has been entered or immediately
to start a simple, manual program.
E B
NTER UTTON
Located in the center of the Display Console it is used to accept information
you are prompted for and to finalize your selection of a preprogrammed
workout or effort level.
S B
TOP UTTON
The Stop buttons are located at the bottom of the Display Console and
perform the same task.
Press the Stop button once and it pauses the workout, holding your
current workout information such as the time elapsed, calories burned
and distance traveled. It does not change any aspect of your workout - it
stops it until you decide to continue. Press the Start button to continue
your workout in progress.
XT-3200/3300/3600/4600
4800/5600/5700 Treadmill
B
UTTONS
18