Audio Test - ADEMCO 6270 Installation And Setup Manual

6270 Installation and Setup Guide

Audio Test

Perform the Audio Test as follows:
SCREEN
7–6
ACTION
When you press the Test button
associated with the Audio Test "Testing.."
is displayed in the test status column on
the "Diagnostics" screen while beeps
sound from the speaker. At the
conclusion of the test, a pop-up
"Confirmation Window" is displayed in the
center of the "Diagnostics" screen.
Within the Confirmation Window the
question "Did you hear Beep?" is
displayed.
When you press the Yes button, "Passed"
is displayed in the test status column on
the "Diagnostics" screen.
When you press the No button, "Failed."
is displayed in the test status column on
the "Diagnostics" screen.