ADEMCO 6270 Installation And Setup Manual page 18

6270 Installation and Setup Guide
SCREEN
4–4
ACTION
5. Enter your 4-digit Installer code. The
"Advanced Setup" menu screen is
displayed.
Note: If the top of the screen is displaying
ECP Error, the ECP address in the 6270
is not valid for the panel that it is
connected to. To change the ECP
address in the 6270 when ECP Error is
being displayed, enter the 6270 default
code of "4140" to advance to the next
screen.
6. Press the Central Station button. The
"Central Station" menu screen is
displayed.