ADEMCO 6270 Installation And Setup Manual page 34

6270 Installation and Setup Guide
SCREEN
5–4
ACTION
4. Type in the user name (6 characters
max.) and press the OK button. The
"User Options" screen is displayed with
Enter User Code... displayed.
5. Touch the box next to Enter User
Code... The "User Authorization" screen
is displayed with the instructions "Enter 4
Digits".
6. Enter the 4-digit code for this user.
The "User Options" screen is displayed
with the user's name and code displayed.
7. Select the partitions, access level, and
enter a user number for this user.
If assigning this user to wireless key, enter
one of the zone numbers of the keyfob
(the wireless key must be programmed
first before it can be assigned to a user).