Table of Contents
Advertisement
SECTION 4: Initial Setup
To change the address, perform the following.
SCREEN
ACTION
1. On the "Central Station" screen press
the ECP Address button. A pop-up
window is displayed with options for
selecting the 6270's ECP address.
2. The available ECP addresses are:
1-2
for residential controls or
1-30 for commercial controls
Select the ECP address for this 6270
using the Up/Dn arrows. Press the OK
button to accept the address setting or the
CANCEL button to maintain the original
ECP address. The 6270 goes to the
"Central Station" menu screen.
3. Press the "Back" button three times to
save the new address. The "More
Choices" screen is displayed.
4–5
Hide quick links:
Advertisement
Table of Contents
