How To Select Screen Saver Activation Time - ADEMCO 6270 Installation And Setup Manual

How to Select Screen Saver Activation Time

When the 6270 is not armed and not active, it will automatically go
into screen saver mode (display goes blank) after the selected blank
display time has expired (unless you select "never"). To select the
time after which the screen will go blank, do the following:
SCREEN
SECTION 4: Initial Setup
ACTION
1. Press the Blank Display After:
"arrow" button. A pull-down menu
displaying the time period options is
displayed.
2. Select the time period option you want
by pressing it. The pop-up window closes
automatically and the selection is
displayed in blue.
Note: Additional options can be viewed
by using the up/down "arrows" to scroll
through the time period options.
3. Press either the "Home" or "Back"
button. A Settings Changed! pop-up
window is displayed asking "Settings
Changed! Remember New Settings?"
Select Yes to save the change or No to
discard the change.
4–13