Setting Chime Mode On/Off - ADEMCO 6270 Installation And Setup Manual

OK
BUTTON
When all settings have been completed, select Ok to save the settings
or Cancel to discard the settings that have been entered.

Setting Chime Mode On/Off

Operating modes allows you to turn the 6270 chime mode on or off.
When the chime mode is selected, a request is sent to the alarm panel
requesting that the panel chime the 6270 whenever an entry/exit or
perimeter zone is opened.
Access the "Operating Modes" screen as follows:
1. From the "Home" screen, press the SECURITY button. The "Arming" screen
is displayed.
SCREEN
Set Time & Date Screen
2. Press the MORE CHOICES button.
The "More Choices" screen is displayed.
SECTION 4: Initial Setup
INCREASE
BUTTON
(TYPICAL)
DECREASE
BUTTON
(TYPICAL)
CANCEL
BUTTON
6270-008-V0
ACTION
4–15