System Setting - Sony LMD-A240 Operating Instructions Manual

[System Setting]

Submenu Setting
[Language] Selects the menu or message language
from among seven languages.







[LED Brightness] Selects the brightness of the indicator's
LED of the buttons and power switch.


[Format Display] Selects the display mode of the signal
format.


[Power Saving] Sets the power saving mode to [On] or
[Off]. When you set to [On], the
monitor goes into power saving mode if
no signal is input for about one minute.
While the unit is in power saving mode,
the currently-set input select button
flashes.
When a source name or tally
information is input, a front panel
button is pressed, or a parallel or serial
remote command is input, the unit exits
the power saving mode.
[Power On Setting] Sets this unit's setting status after the
unit is turned on. Select from [Last
Memory], [User Preset1], [User
Preset2], [User Preset3], [User Preset4],
[User Preset5] or [Factory Preset].
When [Factory Preset] is selected, the
unit returns to the factory default
setting except for the following:










20
Adjustment Using the Menus
[English]: English
[Français]: French
[Deutsch]: German
[Español]: Spanish
[Italiano]: Italian
[ ]: Japanese
[ ]: Chinese
[High]: The LED becomes brighter.
[Low]: The LED becomes darker.
[Auto]: The format and scan mode
are displayed for about five
seconds when the input of the
signal starts.
[Off]: The display is hidden.
Color temperature for [User1]
Color temperature for [User2]
User Preset for [User Preset1]
User Preset for [User Preset2]
User Preset for [User Preset3]
User Preset for [User Preset4]
User Preset for [User Preset5]
Password setting
Network setting
Language setting
Submenu Setting
[User Reset] Returns to the factory default setting
except for the following:
Color temperature for [User1]

Color temperature for [User2]

User Preset for [User Preset1]

Password setting

Network setting

Language setting

[Cancel]: Cancels the reset.

[Confirm]: Resets the unit. When the

[User Preset Setting]
Submenu Setting
[User Preset Status] You can confirm the setting status of the
User Presets. The status of the selected
User Preset number is displayed. By
turning the page, you can confirm the
status of [User Preset1], [User Preset2],
[User Preset3], [User Preset4], [User
Preset5] and [Default]. The displayed
items are the following:
[Color Temp]

[Color Space]

[Gamma]

[Brightness/Contrast]

[Chroma/Phase]

[Aperture]

[Volume]

[Load] Loads the saved settings in [User
Preset1], [User Preset2], [User Preset3],
[User Preset4], [User Preset5] and
[Default].
[Cancel]: Cancels loading.

[Confirm]: Loads the setting.

[Save] Saves the current setting status to [User
Preset1], [User Preset2], [User Preset3],
[User Preset4] or [User Preset5].
[Cancel]: Cancels saving.

[Confirm]: Saves the setting.

Note
When the [Password Lock] is set to
[On], the [User Preset1] value is
protected by a password. When the
value is saved to [User Preset1], enter
the password.
reset finishes, this unit restarts.