System Setting - Sony PVM-X300 Operating Instructions Manual

Submenu Setting
INTERFACE FORMAT Selects the interface format.
For SDI input
Select either of the following two
interface formats. The SIGNAL
FORMAT item may appear,
depending on the selection.
• QUAD-LINK 3G-SDI: Select
• QUAD-LINK HD-SDI: The
For HDMI input
The INTERFACE FORMAT is
fixed to SINGLE-LINK HDMI.
Select the INPUT.
SIGNAL FORMAT For SDI input
Selects the format of the SDI input
signal when QUAD-LINK 3G-SDI
is selected for the INTERFACE
FORMAT.
You can select from AUTO,
422 YCBCR 10BIT, 444 RGB
10BIT, 444 YCBCR 10BIT,
444 RGB 12BIT, or 444 YCBCR
12BIT.
For HDMI input
This item cannot be accessed.
INPUT Selects the input connector to be
used.
For SDI input
This item is fixed to INPUT
1&2&3&4.
For HDMI input
• INPUT 1: to use HDMI input
• INPUT 2: to use HDMI input
• INPUT 3: to use HDMI input
• INPUT 4: to use HDMI input
2K/HD INPUT SETTING
This is the input setting for signals below 1920 × 1080.
The setting items differ depending on the selection made
with the input select button (SDI or HDMI) on the front
panel.
USER CONFIG-2K/HD INPUT SETTING
xxxxxxxxx
INTERFACE FORMAT:
x
SIGNAL FORMAT:
xxxx
INPUT:
the SIGNAL FORMAT.
The INPUT is fixed to
INPUT 1&2&3&4.
SIGNAL FORMAT is fixed
to 422 YCBCR 10BIT, and
the INPUT is fixed to
INPUT 1&2&3&4.
connector 1
connector 2
connector 3
connector 4
Submenu Setting
INTERFACE FORMAT Displays the interface format.
For SDI input
The INTERFACE FORMAT is
fixed to SINGLE-LINK 3G/HD-
SDI, and the SIGNAL FORMAT is
fixed to AUTO. Select the INPUT.
For HDMI input
The INTERFACE FORMAT is
fixed to SINGLE-LINK HDMI.
Select the INPUT.
SIGNAL FORMAT For SDI input
This item is fixed to AUTO.
For HDMI input
This item cannot be accessed.
INPUT Selects the input connector to be
used.
For SDI input (SINGLE-LINK
3G/HD-SDI)
• INPUT 1: to use SDI IN
• INPUT 2: to use SDI IN
• INPUT 3: to use SDI IN
• INPUT 4: to use SDI IN
For HDMI input (SINGLE-LINK
HDMI)
• INPUT 1: to use HDMI input
• INPUT 2: to use HDMI input
• INPUT 3: to use HDMI input
• INPUT 4: to use HDMI input

SYSTEM SETTING

USER CONFIG-SYSTEM SETTING
xx
FORMAT DISPLAY:
xxxx
LED BRIGHTNESS:
Submenu Setting
FORMAT DISPLAY Selects the display mode of the
signal format.
• ON: The format is always
• OFF: The display is hidden.
• AUTO: The format is displayed
connector 1
connector 2
connector 3
connector 4
connector 1
connector 2
connector 3
connector 4
displayed.
for about five seconds when
the input of the signal starts.
15
Adjustment Using the Menus