Table of Contents
Advertisement
Submenu
Setting
[Volume]
Adjusts the volume.
[Aperture]
Sharpens the picture outline. The
higher the setting, the sharper the
picture. The lower the setting, the softer
the picture. The aperture does not work
when [Focus Assist] is [On].
[Composite Video
Control]
[User Configuration] menu
The user configuration menu is used for [System
Setting], [User Preset Setting], [Input Setting],
[Function Button Setting], [Marker Setting], [Time
Code Setting], [P&P Setting], [Focus Assist Setting],
[Camera Metadata Setting], [WFM/ALM/Vector
(waveform monitor, audio level meter, and vectorscope)
Setting], [Audio Setting], [Closed Caption Setting] and
[On Screen Tally Setting].
20
Adjustment Using the Menus
[V Sharpness]: A crisp image can be
displayed.
When the setting is higher, the
picture becomes even more
crisp.
[NTSC Setup]: Selects the NTSC
setup level from two modes.
The 7.5 setup level is used
mainly in North America. The 0
setup level is used mainly in
Japan. You can select between
[0] and [7.5].
[ACC] (Auto Color Control): Sets
the ACC circuit [On] or [Off].
To confirm the fine adjustment,
select [Off]. Normally select
[On].
[Shift H]: Adjusts the position of the
picture. As the setting increases,
the picture moves to the right,
and as the setting decreases, the
picture moves to the left.
[Shift V]: Adjusts the position of the
picture. As the setting increases,
the picture moves up, and as the
setting decreases, the picture
moves down.
[System Setting]
Submenu
Setting
[Language]
Selects the menu or message language
from among seven languages.
[English]: English
[Français]: French
[Deutsch]: German
[Español]: Spanish
[Italiano]: Italian
[
[
[LED Brightness]
Selects the brightness of the indicator's
LED of the buttons and power switch.
[High]: The LED becomes brighter.
[Low]: The LED becomes darker.
[Format Display]
Selects the display mode of the signal
format.
[Auto]: The format and scan mode
[Off]: The display is hidden.
[Flicker Free]
Set this to [On] to enable view images
without flicker.
An OLED panel can provide superior
video responsiveness and scan driving,
reproducing images with little
contouring or afterimaging. However,
scan driving can cause flicker when
input signals have a low vertical
frequency (24P/PsF, 50i, etc.). Set
[Flicker Free] to [On] to greatly reduce
this phenomenon.
With this mode set to on, quick-moving
images may exhibit contours or an
afterimage.
]: Japanese
]: Chinese
are displayed for about five
seconds when the input of the
signal starts.
Hide quick links:
Advertisement
Table of Contents
