[User Control] Menu; [User Configuration] Menu - Sony LMD-A240 Operating Instructions Manual

Submenu Setting
[Manual Adjustment] If you set the [Color Temp] to the
[User1] or [User2] setting, the item
displayed is changed from black to
white, which means you can adjust the
color temperature.
The set values are memorized.
[Adjust Gain/Bias]:

[Copy From]: If you select [D65],

Note
If the [Password Lock] has been turned
[On], the [User1] value is protected by a
password. To change the values, enter
the password.
[Color Space] Selects the color space from among
[ITU-709], [EBU], [SMPTE-C],
[Native]. [Native] sets the color space to
the original color reproduction of the
panel.
[Gamma] Select the appropriate gamma mode
from [2.2] or [2.4].

[User Control] menu

The user control menu is used for adjusting the picture.
Submenu Setting
[Volume] Adjusts the volume.
[Aperture] Sharpens the picture outline. The
higher the setting, the sharper the
picture. The lower the setting, the softer
the picture. The aperture does not work
when [Focus Assist] is [On].
[R Gain]: Adjusts the color

balance (gain) of R (red).
[G Gain]: Adjusts the color

balance (gain) of G (green).
[B Gain]: Adjusts the color

balance (gain) of B (blue).
[R Bias]: Adjusts the color

balance (bias) of R (red).
[G Bias]: Adjusts the color

balance (bias) of G (green).
[B Bias]: Adjusts the color

balance (bias) of B (blue).
[D93], [User1] or [User2], the
white balance data for the
selected color temperature will
be copied to the [User1] or
[User2] setting.
Submenu Setting
[Backlight] Adjusts the backlight. When the setting
is changed, the brightness of the
backlight is changed.
[Composite Video [V Sharpness]: A crisp image can be

Control]
[NTSC Setup]: Selects the NTSC

[ACC] (Auto Color Control): Sets

[Shift H]: Adjusts the position of the

[Shift V]: Adjusts the position of the


[User Configuration] menu

The user configuration menu is used for [System
Setting], [User Preset Setting], [Input Setting],
[Function Button Setting], [Marker Setting], [Time
Code Setting], [P&P Setting], [Focus Assist Setting],
[Camera Metadata Setting], [WFM/ALM/Vector
(waveform monitor, audio level meter, and vectorscope)
Setting], [Audio Setting], [Closed Caption Setting], [On
Screen Tally Setting] and [In-Monitor Display Setting].
displayed.
When the setting is higher, the
picture becomes even more
crisp.
setup level from two modes.
The 7.5 setup level is used
mainly in North America. The 0
setup level is used mainly in
Japan. You can select between
[0] and [7.5].
the ACC circuit [On] or [Off].
To confirm the fine adjustment,
select [Off]. Normally select
[On].
picture. As the setting increases,
the picture moves to the right,
and as the setting decreases, the
picture moves to the left.
picture. As the setting increases,
the picture moves up, and as the
setting decreases, the picture
moves down.
Adjustment Using the Menus
19