Related Manuals for Sony LMD-1420MD
Summary of Contents for Sony LMD-1420MD
-
Page 1: Lcd Monitor
2-659-026-13 (1) LCD Monitor Instructions for Use LMD-1420MD © 2005 Sony Corporation... - Page 2 To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. In the event of a malfunction or when maintenance is necessary, consult an authorized Sony dealer. This unit contains substances which can pollute the environment if disposed carelessly. Please contact our nearest representative office or your local environmental office in case of disposal of this unit.
-
Page 3: Warning On Power Connection
4. The operator should take precautions to avoid touching the rear panel input and output circuitry and the patient at the same time. 5. Model LMD-1420MD is a monitor intended for use in a medical environment to display pictures from cameras or other systems. These models are nonpatient care equipment with respect to the requirement of leakage current. -
Page 4: Table Of Contents
Table of Contents Precaution ... 5 On Safety ... 5 On Installation ... 5 Handling the LCD Screen ... 5 About the Fluorescent Tube ... 5 On Cleaning ... 5 On Repacking ... 6 On Mounting on a Rack ... 6 On Fan Error ... -
Page 5: Precaution
A specially designed fluorescent tube is installed as the lighting apparatus for this unit. If the LCD screen becomes dark, unstable or does not turn on, consult your Sony dealer. On Cleaning Before cleaning Be sure to disconnect the AC power cord from the AC outlet. -
Page 6: On Repacking
Rack mount monitors The LMD-1420MD can be installed in a standard 19- inch rack using an optional rack mounting bracket MB- 526. Monitor stand with tilt function As the stand with tilt function is equipped normally for the monitor, you can use it easily on the desk top. - Page 7 External sync input When the EXT SYNC button is in the on position, the unit can be operated on the sync signal supplied from an external sync generator. Automatic termination (connector with mark only) The input connector is terminated internally at 75 ohms when nothing has been connected to the output connector.
-
Page 8: Location And Function Of Parts And Controls
Location and Function of Parts and Controls Front Panel MENU VOLUME RGB/ BLUE LINE A LINE B COMPONENT SYNC ONLY SCAN ASPECT RESET ENTER a Tally lamp The lamp lights in green when this unit is controlled from the PARALELL REMOTE terminal on the rear panel of the unit. -
Page 9: Input Signals And Adjustable/Setting Items
j SDI button Press to monitor the signal from the OPTION IN connector. k RGB/COMPONENT button Press to monitor the signal through the IN (input) connector of the RGB/COMPONENT connectors. l LINE B button Press to monitor the signal through the IN (input) connector of the LINE B connectors. -
Page 10: Rear Panel
Rear Panel LINE A PARALLEL REMOTE RGB/COMPONENT LINE B VIDEO VIDEO SYNC AC IN AUDIO AUDIO AUDIO a OPTION IN connector (D-sub 9-pin, female) When optional SDI input adaptor BKM-320D is connected, SDI signals are input. Press the SDI button to monitor the signal. Note Do not install the equipment other than BKM-320D. -
Page 11: Installing To The Rack
VIDEO IN/OUT (BNC) These are the input/output connectors for a composite video signal. Connect them to the composite video input/output connectors on equipment such as a VCR, video camera, or another monitor. AUDIO IN/OUT (RCA pin) These are the input/output jacks for an audio signal. Connect them to the audio input/output jacks on equipment such as a VCR. -
Page 12: Connecting The Ac Power Cord
Connecting the AC Power Cord Connect the supplied AC power cord as illustrated. Plug the AC power cord into the AC IN socket on the rear panel. Then, attach the AC plug holder (supplied) to the AC power cord. AC IN socket AC plug holder (Supplied) AC power cord... -
Page 13: Selecting The Default Settings
Selecting the Default Settings When you turn on the unit for the first time after purchasing it, select the area where you intend to use this unit from among the options. The default setting values for each area COLOR TEMP NORTH AMERICA ARGENTINA LATIN AMERICA... -
Page 14: Selecting The Menu Language
4 If ASIA EXCEPT JAPAN is selected: Customers who will use this unit in the shaded areas shown in the map below should select NTSC AREA. Other customers should select PAL AREA. A S I A E X C E P T J A P A N x N T S C A R E A... -
Page 15: Using The Menu
Press the M or m button to select the USER CONFIG 1/2 (User Configuration 1/2) menu, then press the , or ENTER button. The setting items (icons) in the selected menu are displayed in yellow. U S E R C O N F I G ( 1 / 2 ) R r ·... -
Page 16: Adjustment Using The Menus
Press the M or m button to select the item, then press the , or ENTER button. The item to be changed is displayed in yellow. Note If the menu consists of multiple pages, press M or m to go to the desired menu page. Make the setting or adjustment on an item. -
Page 17: Adjusting And Changing The Settings
KEY INHIBIT KEY INHIBIT Adjusting and Changing the Settings STATUS menu The STATUS menu is used to display the current status of the unit. The following items are displayed: S TAT U S ( 1 / 2 ) R r F O R M AT xxxxx xxxxxxxx... -
Page 18: User Config Menu
USER CONFIG menu You can select a language, etc. Items that cannot be adjusted depending on the input signal are displayed in blue. U S E R C O N F I G ( 1 / 2 ) R r x R G B / C O M P S E L ·... -
Page 19: Remote Parallel Menu
REMOTE PARALLEL menu Select the PARALLEL REMOTE connector pins for which you want to change the function. You can assign various functions to 1 to 4 pins and 6 to 8 pins. The following lists the functions you can assign to the pins. -
Page 20: Specifications
Specifications Picture performance LCD panel a-Si TFT Active Matrix Picture size 14 type 283 × 212 × 354 mm (W/H/ Diagonal) (11 Resolution 640 × 480 dots (VGA) Viewing angle 85°/85°/85°/85° (typical) Scan Under –3 % Normal 5 % Aspect ratio Display color 16,200,000 Input/output connectors... - Page 21 Storage and transport conditions Temperature–20 °C to 55 °C (–4 °F to 131 °F) Humidity 0% to 90% Pressure 700 hPa to 1060 hPa Accessories supplied AC power cord (1) AC plug holder (2) Instructions for Use (1) CD-ROM (1) Quick Reference (1) When you First Use the Monitor (1) Warranty Card (1)
- Page 22 Video signal formats The unit is applicable to the following signal formats. System Total lines Active lines 575/50I (PAL) 480/60I (NTSC) System Effective picture size 575/50I (PAL) 640 × 480 480/60I (NTSC) 640 × 480 When an optional input adaptor is installed, the unit is applicable to the following signal formats. When BKM-320D is installed Input System...
-
Page 23: Dimensions
Dimensions Front 343 (13 MENU VOLUME RGB/ BLUE LINE A LINE B COMPONENT SYNC ONLY SCAN ASPECT RESET ENTER Rear 100 (4) LINE A PARALLEL REMOTE RGB/COMPONENT OPTION AUDIO IN LINE B VIDEO VIDEO SYNC AC IN AUDIO AUDIO AUDIO Side POWER Bottom... - Page 24 Sony Corporation...