Download  Print this page

Sony LMD-2030W Operating Instructions Manual

Sony computer monitor user manual.
Hide thumbs


3-113-855-11 (1)

LCD Monitor

Operating Instructions
© 2007 Sony Corporation


Table of Contents

   Also See for Sony LMD-2030W

   Related Manuals for Sony LMD-2030W

   Summary of Contents for Sony LMD-2030W

  • Page 1: Lcd Monitor

    3-113-855-11 (1) LCD Monitor Operating Instructions LMD-2030W © 2007 Sony Corporation...
  • Page 2 The model and serial numbers are located at the rear. Record these numbers in the spaces provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. ____________________ Serial No. ____________________ Important Safety Instructions •...
  • Page 3 E3 (urban outdoors), E4 (controlled EMC environment, ex. TV studio) For the customers in Europe The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
  • Page 4: Table Of Contents

    Table of Contents Precaution ... 5 On Safety ... 5 On Installation ... 5 Handling the LCD Screen ... 5 Note on faulty pixels on the LCD panel ... 5 About the Fluorescent Tube ... 5 On Cleaning... 5 On Repacking ... 5 On Mounting on a Rack ...
  • Page 5: Precaution

    About the Fluorescent Tube A specially designed fluorescent tube is installed as the lighting apparatus for this unit. If the LCD screen becomes dark, unstable or does not turn on, consult your Sony dealer. On Cleaning Before cleaning Be sure to disconnect the AC power cord from the AC outlet.
  • Page 6: On Replacing The Parts

    Note that if service personnel changes some parts during repair, these parts may be retained. Features Features The LMD-2030W (20-inch) is a multiple format LCD monitor for broadcast/professional use featuring a precise image and high performance. Supporting digital/analog main broadcast signals, and HDMI input, it can be used under various lighting conditions.
  • Page 7 Blue only mode In the blue only mode, a monochrome display is obtained with all the three R/G/B picture elements driven with a blue signal. This mode is convenient for chroma and phase adjustments and monitoring of VCR noise. Marker function CENTER MARKER, 16:9 MARKER for the 4:3 aspect ratio or 4:3 MARKER for the 16:9 aspect ratio can be displayed.
  • Page 8: Location And Function Of Parts And Controls

    Location and Function of Parts and Controls Front Panel Tally lamp You can check the status of the monitor by the color of the tally lamp. The tally lamp lights in red, green or amber depending on the setting of the REMOTE PARALLEL menu. POWER switch and indicator Press to turn on the power.
  • Page 9: Input Signals And Adjustable/setting Items

    LINE A button Press to monitor the signal through the LINE A input connector. Input Signals and Adjustable/Setting Items Item Video, Y/C B & W CONTRAST BRIGHT × CHROMA PHASE × (NTSC) APERTURE COLOR TEMP COMP LEVEL × × NTSC SETUP (NTSC) (480/60I) GAMMA...
  • Page 10: Rear Panel

    Note Use HDMI compliant cable (optional) with HDMI logo. OPTION IN connector (D-sub 9-pin, female) Inputs SDI signals when optional Sony input adaptor BKM-320D is connected. Press the SDI button to select the signal. Note Do not connect the equipment other than BKM-320D.
  • Page 11: Installing To The Rack

    LINE A connectors Line input connectors for Y/C separate, composite video and audio signals and their loop-through output connectors. Press the LINE A button to monitor the signal input through these connectors. If you input signals to both Y/C IN and VIDEO IN, the signal input to the Y/C IN is selected.
  • Page 12: Connecting The Ac Power Cord

    Connecting the AC Power Cord Plug the AC power cord into the AC IN socket on the rear panel. Then, attach the AC plug holder (supplied) to the AC power cord. AC IN socket AC power cord AC plug holder (Supplied) Slide the AC plug holder over the cord until it locks.
  • Page 13: Selecting The Default Settings

    Selecting the Default Settings When you turn on the unit for the first time after purchasing it, select the area where you intend to use this unit from among the options. The default setting values for each area COLOR TEMP NORTH AMERICA ARGENTINA LATIN AMERICA...
  • Page 14: Selecting The Menu Language

    4 If ASIA EXCEPT JAPAN is selected: Customers who will use this unit in the shaded areas shown in the map below should select NTSC AREA. Other customers should select PAL AREA. A S I A E X C E P T J A P A N x N T S C A R E A...
  • Page 15: Using The Menu

    U S E R C O N F I G ( 1 / 2 ) R r · R G B / C O M P S E L · C O M P L E V E L · N T S C S E T U P ·...
  • Page 16: Adjustment Using The Menus

    Select an item. Press the M or m button to select the item, then press the , or ENTER button. The item to be changed is displayed in yellow. Note If the menu consists of multiple pages, press M or m to go to the desired menu page.
  • Page 17: Adjusting And Changing The Settings

    Adjusting and Changing the Settings STATUS menu The STATUS menu is used to display the current status of the unit. The following items are displayed: S TAT U S ( 1 / 2 ) R r xxxxx F O R M AT xxxxxxxx xxxx C O L O R T E M P...
  • Page 18 U S E R C O N F I G ( 1 / 2 ) R r xR G B / C O M P S E L xxxx xxxxx · C O M P L E V E L ·...
  • Page 19: Remote Parallel Menu

    REMOTE PARALLEL menu Select the PARALLEL REMOTE connector pins for which you want to change the function. You can assign various functions to 1 to 4 pins and 6 to 8 pins. The following lists the functions you can assign to the pins. R E M O T E PA R A L L E L x1 P I N xxxxx...
  • Page 20: Specifications

    Design and specifications are subject to change without notice. Note Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT...
  • Page 21: Pin Assignment

    Pin assignment PARALLEL REMOTE connector Modular connector (8-pin) Pin number Functions Designate LINE A input signal Designate HDMI input signal Designate RGB/COMPONENT input signal 16:9 Selecting UNDER Selecting OVER For details on function allocations, see “REMOTE PARALLEL menu” (page 19). Wiring required to use the Remote Control Connect the function you want to use with a Remote Control to the Ground (Pin 5).
  • Page 22 Video signal formats The unit is applicable to the following signal formats. System Total lines 575/50I (PAL) 480/60I (NTSC) 576/50P 480/60P 1080/24PsF 1125 1080/25PsF 1125 1080/24P 1125 1080/25P 1125 1080/30P 1125 1080/50I 1125 1080/60I 1125 720/50P 720/60P *1 Also supports frame rate 1/1.001. Applicable DVI input signals When a PC signal is input to the HDMI IN connector using a DVI conversion cable Resolution...
  • Page 23: Dimensions

    Dimensions Front 493 (19 Rear 100 (4) Side 75.2 87 (3 96.8 (3 264.4 (10 Bottom 204.3 (8 165.1 (6 216.3 (8 4-M5 Unit: mm (inches) Dimensions...
  • Page 24 Sony Corporation...

Comments to this Manuals

Symbols: 0
Latest comments: