System Setting; Audio Setting - Sony PVM-X300 Operating Instructions Manual

* When a 4K or QFHD-resolution picture is displayed, the
actual display position of the time code, in certain cases,
differs from the position set in the TIME CODE SETTING
menu.
AUDIO LEVEL METER SETTING
USER CONFIG-AUDIO LEVEL METER SETTING
AUDIO LEVEL METER:
POSITION:
MAT:
Submenu Setting
AUDIO LEVEL Selects ON to display the audio level
METER meter display and OFF not to display.
POSITION Sets the position of the audio level meter
display on the screen.
• TOP LEFT: to display at the top left
• TOP RIGHT: to display at the top
• BOTTOM LEFT: to display at the
• BOTTOM RIGHT: to display at the
MAT Selects the background of the audio level
meter display.
• BLACK: The background becomes
• HALF: The background becomes

AUDIO SETTING

USER CONFIG-AUDIO SETTING
SDI AUDIO
LEFT AUDIO:
RIGHT AUDIO:
Submenu Setting
SDI AUDIO Sets the audio channel when SDI signal
is input.
LEFT AUDIO Selects the left audio channel.
You can select from among CH1 to
CH16 channels.
20
Adjustment Using the Menus
xx
xxxxxx
xxx
right
bottom left
bottom right
black. The image is hidden
behind the background.
transparent. The image is seen
through under the audio level
meter display.
xx
xx
RIGHT AUDIO Selects the right audio channel.
You can select from among CH1 to
CH16 channels.
If LEFT AUDIO is set between CH1 and
CH8, CH1 to CH8 can also be set for
RIGHT AUDIO. If LEFT AUDIO is set
between CH9 and CH16, CH9 to CH16
can also be set for RIGHT AUDIO.
Note
The audio channel is fixed as CH1 (LEFT) or CH2
(RIGHT) for HDMI input.

SYSTEM SETTING

USER CONFIG-SYSTEM SETTING
xx
FORMAT DISPLAY:
xx
LED:
xxxx
LED BRIGHTNESS:
Submenu Setting
FORMAT Selects the display mode of the signal
DISPLAY format.
• ON: The format is always displayed.
• OFF: The display is hidden.
• AUTO: The format is displayed for
about five seconds when the input
of the signal starts.
LED Selects whether the LEDs on the buttons
light or not.
• ON: The LEDs always light.
• OFF: The LEDs do not light at all.
LED BRIGHTNESS Selects the brightness of the LED of the
buttons.
• HIGH: The LED becomes brighter.
• LOW: The LED becomes darker.
Functions assignable to the function
buttons
You can assign the following functions to the function
buttons F1 to F7 on the front panel.
BRIGHTNESS
Press the button to display the adjustment screen and
adjust the picture brightness. Press again to hide the
adjustment screen. However, the picture brightness
remains adjustable. Turn the menu selection control
right to increase the brightness and turn left to decrease
it.