Checking Your Settings - Zoom X6 User Manual

Important!
To add security to your network, see Setting Wireless Security on
page 27.
To disconnect from the current network:
1
On your computer that has a wireless adapter, find the wireless
network connection option (similar to the process of adding
your computer to the network).
2
Click or highlight Zoom.
3
Select or click on Disconnect or similarly-named button.

Checking Your Settings

If you ever need to check your wireless settings, you can do so
from the Wireless Setup page. This page is available in the Zoom
Configuration Manager by clicking Wireless from the left-side
menu. For instructions on how to log in to the
Configuration Manager, go to page 12.
The table below explains the settings:
This setting... Lets you specify...
Wireless Basic A check mark in the Enable Wireless check
box shows that your wireless network is up. If
there is no check mark next to the Enable
Wireless check box, this indicates your Wireless
is not enabled.
Hide SSID Click in the check box if you do not want to
broadcast the SSID of your network.
SSID The Service Set Identifier for your wireless
network. By default, the SSID for the X6 is
Zoom. You can change the SSID to any name
that you want.
Channel Indicates the channel your wireless connection
uses by default for your wireless connection.
The X6 comes set for channel 10.
Country Select your country from the drop-down menu.
Chapter 3: Setting up Your Wireless Network
Zoom
X6 User Manual