Checking Your Settings - Zoom ADSL X6v User Manual

Checking Your Settings

If you ever need to check your wireless settings, you can do so
from the Wireless Setup page. This page is available in the Zoom
Configuration Manager by clicking the Wireless icon.
The table below explains the settings:
This setting... Lets you specify...
Wireless Status Enable shows that your wireless network is up.
Disable indicates that your wireless network is
down.
SSID
The Service Set Identifier for your wireless network.
By default, the SSID for the
change the SSID to any name that you want.
Hide SSID Set to true if you do not want to broadcast the SSID
of your network.
Default Channel The channel your wireless connection uses by
default for your wireless connection. The
comes set for channel 10.
Profile The standard used by your wireless adapters. This
drop-down list contains 802.11b Only, 802.11g
Only, or Mixed Mode.
The default is Mixed Mode, which allows you to
mix both b and g wireless adapters.
Encryption The type of encryption used for your wireless
Internet signal. This drop-down list contains None,
WEP-64 bit, WEP 128 bit, WPA and WPA2.
The default is None, meaning that no security is
enabled.
Region If your country is not listed, select Other.
Chapter 2: Setting Up Your Wireless Network 30
is zoom. You can
X6v
X6v